Intelligent dual curve-driven tool path optimization and virtual CMM inspection for sculptured surface CNC machining

This paper investigates the profitability of a dual‐curve driven surface finish tool path under the concept of optimizing crucial machining parameters such as toroidal end‐mill diameter, lead angle and tilt angle. Surface machining error as well as tool path time are treated as optimization objectives under a multi‐criteria sense, whilst a central composite design is conducted to obtain experimental outputs for examination and, finally, fit a full quadratic model considered as the fitness function for process optimization by means of a genetic algorithm. A benchmark sculptured surface given as a second‐order parametric equation was tested and simulated using a cutting‐edge manufacturing modeling software and best parameters recommended by the genetic algorithm were implemented for validation. Further assessment involves the virtual inspection to selected profile sections on the part. It was shown that the approach can produce dual‐curve driven tool trajectories capable of eliminating sharp scallop heights, maximizing machining strip widths as well as maintaining smoothness quality and machining efficiency

A rare case of complete C2–C3 dislocation with mild neurological symptoms

The authors report a rare case of complete C2–C3 dislocation with unexpectedly mild neurological symptoms in a 57 year old man involved in a motor vehicle accident, who had previously undergone posterior laminectomy from C3 through C7. A retrospective chart analysis and a thorough radiographic review were performed. X-rays and CT of the cervical spine demonstrated a complete dislocation at the C2–C3 level. Computed tomographic angiography revealed disruption of both vertebral arteries; however, blood flow was evident in the basilar artery. After radiologically guided placement in cervical traction with tongs that reduced the subluxation by approximately 50% the patient had spontaneous eye opening and was able to follow commands. A two-stage 360(o) stabilization and fusion was performed and the patient was finally discharged 24 days after admission with his neurological status essentially unchanged. In conclusion, our patient presented with surprisingly mild neurological symptoms. The previously performed laminectomy could have both predisposed to injury as well as protected his spinal cord from potentially fatal trauma

A cervical ligamentum flavum cyst in an 82-year-old woman presenting with spinal cord compression: a case report and review of the literature

<p>Abstract</p> <p>Introduction</p> <p>We report on a very rare case of a cervical ligamentum flavum cyst, which presented with progressive myelopathy and radiculopathy. The cyst was radically extirpated and our patient showed significant recovery. A review of the relevant literature yielded seven cases.</p> <p>Case presentation</p> <p>An 82-year-old Greek woman presented with progressive bilateral weakness of her upper extremities and causalgia, cervical pain, episodes of upper extremity numbness and significant walking difficulties. Her neurological examination showed diffusely decreased motor strength in both her upper and lower extremities. Magnetic resonance imaging of her cervical spine demonstrated a large, well-demarcated cystic lesion on the dorsal aspect of her spinal cord at the C3 to C4 level, significantly compressing the spinal cord at this level, in close proximity to the yellow ligament and the C3 left lamina. The largest diameter of this lesion was 1.4 cm, and there was no lesion enhancement after the intravenous administration of a paramagnetic contrast. The lesion was surgically removed after a bilateral C3 laminectomy. The thick cystic wall was yellow and fibro-elastic in consistency, while its content was gelatinous and yellow-brownish. A postoperative cervical-spine magnetic resonance image was obtained before her discharge, demonstrating decompression of her spinal cord and dural expansion. Her six-month follow-up evaluation revealed complete resolution of her walking difficulties, improvement in the muscle strength of her arms (4+/5 in all the affected muscle groups), no causalgia and a significant decrease in her preoperative upper extremity numbness.</p> <p>Conclusion</p> <p>Cervical ligamentum flavum cysts are rare benign lesions, which should be included in the list of differential diagnosis of spinal cystic lesions. They can be differentiated from other intracanalicular lesions by their hypointense appearance on T₁-weighted and hyperintense appearance on T₂-weighted magnetic resonance images, with contrast enhancement of the cystic wall. Surgical extirpation of the cyst is required for symptom alleviation and decompression of the spinal cord. The outcome of these cysts is excellent with no risk of recurrence.</p

The relationships between golf and health:A scoping review

OBJECTIVE: To assess the relationships between golf and health. DESIGN: Scoping review. DATA SOURCES: Published and unpublished reports of any age or language, identified by searching electronic databases, platforms, reference lists, websites and from consulting experts. REVIEW METHODS: A 3-step search strategy identified relevant published primary and secondary studies as well as grey literature. Identified studies were screened for final inclusion. Data were extracted using a standardised tool, to form (1) a descriptive analysis and (2) a thematic summary. RESULTS AND DISCUSSION: 4944 records were identified with an initial search. 301 studies met criteria for the scoping review. Golf can provide moderate intensity physical activity and is associated with physical health benefits that include improved cardiovascular, respiratory and metabolic profiles, and improved wellness. There is limited evidence related to golf and mental health. The incidence of golfing injury is moderate, with back injuries the most frequent. Accidental head injuries are rare, but can have serious consequences. CONCLUSIONS: Practitioners and policymakers can be encouraged to support more people to play golf, due to associated improved physical health and mental well-being, and a potential contribution to increased life expectancy. Injuries and illnesses associated with golf have been identified, and risk reduction strategies are warranted. Further research priorities include systematic reviews to further explore the cause and effect nature of the relationships described. Research characterising golf's contribution to muscular strengthening, balance and falls prevention as well as further assessing the associations and effects between golf and mental health are also indicated

Measurement of substructure-dependent jet suppression in Pb+Pb collisions at 5.02 TeV with the ATLAS detector

The ATLAS detector at the Large Hadron Collider has been used to measure jet substructure modification and suppression in Pb+Pb collisions at a nucleon–nucleon center-of-mass energy √sNN = 5.02 TeV in comparison with proton–proton (pp) collisions at √s = 5.02 TeV. The Pb+Pb data, collected in 2018, have an integrated luminosity of 1.72 nb−1, while the ppdata, collected in 2017, have an integrated luminosity of 260 pb−1. Jets used in this analysis are clustered using the anti-kt algorithm with a radius parameter R = 0.4. The jet constituents, defined by both tracking and calorimeter information, are used to determine the angular scale rg of the first hard splitting inside the jet by reclustering them using the Cambridge–Aachen algorithm and employing the soft-drop grooming technique. The nuclear modification factor, RAA, used to characterize jet suppression in Pb+Pb collisions, is presented differentially in rg, jet transverse momentum, and in intervals of collision centrality. The RAA value is observed to depend significantly on jet rg. Jets produced with the largest measured rg are found to be twice as suppressed as those with the smallest rg in central Pb+Pb collisions. The RAA values do not exhibit a strong variation with jet pT in any of the rg intervals. The rg and pT dependence of jet RAA is qualitatively consistent with a picture of jet quenching arising from coherence and provides the most direct evidence in support of this approach

Anomaly detection search for new resonances decaying into a Higgs boson and a generic new particle X in hadronic final states using Formula Presented pp collisions with the ATLAS detector

A search is presented for a heavy resonance Formula Presented decaying into a Standard Model Higgs boson Formula Presented and a new particle Formula Presented in a fully hadronic final state. The full Large Hadron Collider run 2 dataset of proton-proton collisions at Formula Presented collected by the ATLAS detector from 2015 to 2018 is used and corresponds to an integrated luminosity of Formula Presented. The search targets the high Formula Presented-mass region, where the Formula Presented and Formula Presented have a significant Lorentz boost in the laboratory frame. A novel application of anomaly detection is used to define a general signal region, where events are selected solely because of their incompatibility with a learned background-only model. It is constructed using a jet-level tagger for signal-model-independent selection of the boosted Formula Presented particle, representing the first application of fully unsupervised machine learning to an ATLAS analysis. Two additional signal regions are implemented to target a benchmark Formula Presented decay into two quarks, covering topologies where the Formula Presented is reconstructed as either a single large-radius jet or two small-radius jets. The analysis selects Higgs boson decays into Formula Presented, and a dedicated neural-network-based tagger provides sensitivity to the boosted heavy-flavor topology. No significant excess of data over the expected background is observed, and the results are presented as upper limits on the production cross section Formula Presented) for signals with Formula Presented between 1.5 and 6 TeV and Formula Presented between 65 and 3000 GeV. A search is presented for a heavy resonance Y decaying into a Standard Model Higgs boson H and a new particle X in a fully hadronic final state. The full Large Hadron Collider run 2 dataset of proton-proton collisions at √ s = 13     TeV collected by the ATLAS detector from 2015 to 2018 is used and corresponds to an integrated luminosity of 139     fb − 1 . The search targets the high Y -mass region, where the H and X have a significant Lorentz boost in the laboratory frame. A novel application of anomaly detection is used to define a general signal region, where events are selected solely because of their incompatibility with a learned background-only model. It is constructed using a jet-level tagger for signal-model-independent selection of the boosted X particle, representing the first application of fully unsupervised machine learning to an ATLAS analysis. Two additional signal regions are implemented to target a benchmark X decay into two quarks, covering topologies where the X is reconstructed as either a single large-radius jet or two small-radius jets. The analysis selects Higgs boson decays into b ¯ b , and a dedicated neural-network-based tagger provides sensitivity to the boosted heavy-flavor topology. No significant excess of data over the expected background is observed, and the results are presented as upper limits on the production cross section σ ( p p → Y → X H → q ¯ q b ¯ b ) for signals with m Y between 1.5 and 6 TeV and m X between 65 and 3000 GeV

Studies of new Higgs boson interactions through nonresonant HH production in the b¯bγγ fnal state in pp collisions at √s = 13 TeV with the ATLAS detector

A search for nonresonant Higgs boson pair production in the b ¯bγγ fnal state is performed using 140 fb−1 of proton-proton collisions at a centre-of-mass energy of 13 TeV recorded by the ATLAS detector at the CERN Large Hadron Collider. This analysis supersedes and expands upon the previous nonresonant ATLAS results in this fnal state based on the same data sample. The analysis strategy is optimised to probe anomalous values not only of the Higgs (H) boson self-coupling modifer κλ but also of the quartic HHV V (V = W, Z) coupling modifer κ2V . No signifcant excess above the expected background from Standard Model processes is observed. An observed upper limit µHH &lt; 4.0 is set at 95% confdence level on the Higgs boson pair production cross-section normalised to its Standard Model prediction. The 95% confdence intervals for the coupling modifers are −1.4 &lt; κλ &lt; 6.9 and −0.5 &lt; κ2V &lt; 2.7, assuming all other Higgs boson couplings except the one under study are fxed to the Standard Model predictions. The results are interpreted in the Standard Model efective feld theory and Higgs efective feld theory frameworks in terms of constraints on the couplings of anomalous Higgs boson (self-)interactions